| Symptom | Likely dtb.img Problem | Solution | | :--- | :--- | :--- | | No HDMI signal at all | Wrong CPU driver (DTB is for Amlogic vs Rockchip) | Find a DTB with correct compatible = "rockchip,rk3328" | | Boot loops every 10 seconds | Memory address mismatch | Find a DTB with correct reg = <0x0 0x80000000 0x0 0xc0000000> for 3GB RAM | | Gamepad works, Ethernet doesn't | Missing GMAC driver | Edit DTB to enable &gmac2io or &gmac2phy | | Green/pink screen tint | Incompatible HDMI phy settings | Add rockchip,output-mode="rgb" to the &hdmi node |
If the Super Console X is a body, the dtb.img file is the skeleton. In the Linux kernel (which powers EmuELEC and the underlying system of your Super Console X), a is a binary file that tells the operating system exactly what hardware is connected to the processor. super console x dtb.img
Are you trying to or just upgrading to a newer version of EmuELEC? WIPED OUT ENTIRE SD CARD FOR SUPER CONSOLE X! | Symptom | Likely dtb
It tells the kernel where the hardware is located and how to operate it. WIPED OUT ENTIRE SD CARD FOR SUPER CONSOLE X