Fanuc Parameter 1860 ((install))

The night shift supervisor, a man named Cole who had twenty years of sawdust in his blood, stared at the red text on the amber screen. The machine was dead. A three-hundred-thousand-dollar paperweight. And a rush order of aerospace ribs was due at 6:00 AM.

Some high-end FANUC controls (31i-B5, 30i-B) offer an optional that bypasses the dog entirely. In that mode, Parameter 1860 is ignored. However, standard dog-type return remains the default. fanuc parameter 1860

This parameter sets the maximum permissible difference between the position data stored by the CNC and the data actually received from the absolute pulse coder (APC) upon power-up. The night shift supervisor, a man named Cole

| Control Series | Data Format | Minimum Unit | Typical Range (Linear) | |----------------|-------------|--------------|------------------------| | | Integer (mm/min) | 1 mm/min | 100 – 600 | | 16i/18i/21i | Integer | 1 mm/min | 200 – 800 | | 30i/31i/32i-B | Real (decimal) | 0.001 mm/min | 200.000 – 800.000 | | Power Motion i | Real (mm/min) | 0.001 mm/min | 100 – 1000 | And a rush order of aerospace ribs was due at 6:00 AM