: Slide the ALARM ON/OFF switch to the ON position. An indicator light should appear on the display to confirm it is active.
The Etech Accuset allows you to program two independent alarms (Alarm 1 and Alarm 2). Press and hold the Alarm 1 (or Alarm 2) button. etech accuset clock radio manual extra quality
Your search for the was likely prompted by an issue. Let’s solve the top five. : Slide the ALARM ON/OFF switch to the ON position
Maximum output: 5V/1A. Not suitable for high-power tablets or laptops. Press and hold the Alarm 1 (or Alarm 2) button
| Problem | Likely Cause | Extra Quality Fix | | :--- | :--- | :--- | | | Burned-out LED backlight or dimmer set to OFF. | Tap the SNOOZE bar three times quickly. If no change, the internal LEDs may need service—but the alarm will still sound. | | Time resets to 12:00 after power flicker | Dead backup batteries (or missing). | Replace with new AAA alkaline batteries . Then, manually set the time once; the AccuSet chip will remember future power cuts. | | Alarm sounds but radio static | Poor FM reception at 6 AM. | Unwind the FM antenna wire fully. Tape it high on the wall. Or switch the alarm source to a stronger AM station or buzzer. | | Buttons are unresponsive | Button lock or static discharge. | Unplug the unit for 60 seconds, remove batteries, press the POWER button for 10 seconds to drain residual charge, then reassemble. |