Fanuc Parameter 1860 Full 2021 Online

If you encounter an absolute pulse coder alarm (like Alarm 300), you must re-establish the reference position. Simply typing "1" into Parameter 1860 is usually not enough; the CNC must "see" the machine reach its physical home first. Step-by-Step Recovery Procedure: How to Enable Parameter Write Enable (PWE) on a Fanuc CNC

| Parameter | Function | When Active | Typical Range | | :--- | :--- | :--- | :--- | | | Cutting feed ACC/DEC time constant | G01, G02, G03 | 20–200 ms | | 1620 | Rapid traverse (G00) ACC/DEC time constant | G00 | 50–500 ms | | 1622 | Rapid traverse DEC time constant (linear) | G00 (end of move) | 0 (off) to 500 ms | | 1825 | Servo loop gain (Position loop gain) | All motions | 30–200 (1/sec) | fanuc parameter 1860 full

Unplugging the encoder cable or replacing the motor/encoder resets the stored position. If you encounter an absolute pulse coder alarm

Adjusts the electrical reference position by a specific number of pulses (detection units). Data Type: 2-word (Signed long integer). Adjusts the electrical reference position by a specific