Mks Dlc V21 Manual Link — Makerbase

: Detailed circuit diagrams are available at GitHub.

A: Yes, via USB cable. The manual specifies the USB serial port is on /dev/ttyACM0 after installing the CP210x driver (note: the board uses a CH340G, not CP2102 – the manual clarifies this in the BOM). makerbase mks dlc v21 manual link

The official documentation and hardware files are hosted on GitHub by Makerbase: : MKS-DLC GitHub Repository Hardware Schematics : MKS DLC V2.1 Schematic (PDF) Pinout Diagram : MKS DLC V2.1 Pinout (PDF) ⚙️ Technical Specifications MKS DLC V2.1 Control Board User Manual : Detailed circuit diagrams are available at GitHub

A: No. The manual explicitly states the board is hardwired for UART. Attempting SPI will damage the driver. The official documentation and hardware files are hosted

: Connect the MKS DLC V21 to your machine (3D printer or CNC). This usually involves connecting it to the control board via a communication interface (like UART or USB) and ensuring it's properly powered.

The board supports 12-24V DC input. For high-power laser modules and multiple stepper motors, a 10A power supply is recommended. Laser Connection: S: TTL/PWM signal for laser control. G: Ground connection. V: 12-24V Power output (matches input voltage).